The round floating rubber floor is the most classic rubber floor appearance. Since the rubber floor came out, it has been enduring for more than 50 years. Although it looks unremarkable, the sense of design and practicality it embodies has always been fascinating.

The design of the round coin rubber floor is very particular. The floating point is 0.5mm higher than the base surface. If it is too high, although it can serve as a warning, it also increases the resistance of people to walk, especially the effort spent when dragging the suitcase. This is unfriendly to people's use. The height of 0.5mm not only plays a decorative effect, but also has a certain degree of anti-slip performance. ADT rubber flooring is wear-resistant and has a long service life. The rubber flooring produced by our company in 1998 is still used in high-end office buildings in Beijing.

The chamfer of the circular floating point cannot be too large or too small. Too big, inconvenient daily cleaning and maintenance, easy to hide dirt, too small, there is no three-dimensional visual effect. After continuous R&D and improvement by our technical department, we believe that the chamfer R value between 5-9 is the best.

In terms of environment, the circular floating point can be used in most environments, such as airports, museums, exhibition centers, power plants, garages, etc. ADT round floating rubber floor is compression-resistant, impact-resistant and abrasion-resistant.  Our round dot rubber mats meets the EU REACH environmental protection directive (Regulation) and has stable dimensions. It can produce 500*500mm, 600*600mm, 1000*1000mm, and the thickness of 3.5mm is conventional. The thickness can be based on customer needs, from 3.0mm to 10.0mm.